Travel Stops : Two external travel stops permit adjustments of +/-5 degree.
Note : Travel stops are located on end caps on size 045 only.
Bearings : Top quality bearings and seals for low friction and high cycle life to ensure trouble free operation. Same bearings are used for both high and low temperature operations.
Spring Catridges : Modular pre-loaded spring catridges with metal spring guides for use in both high and low temperature applications.
Extruded Aluminum Body : Hard anodized extruded aluminum body with honed internal surface for strength,high cycle life, and low fricitonal resistance.
Shaft Insert Unique output shaft insert can be selected from a variety of standard sizes, including double D, ISO square, and round and keyed, or can be custom designed to fit any output shaft configuration.
Blow-Out Proof Shaft Guide bar in pistons provides an inherent blow-out proof shaft design.
Dual Rack and Pinion Design Dual rack and pinion design offers double acting and fail safe operations in same body. Reverse rotation can be accomplished by simply inverting the pistons.
End Caps Standard end caps are rounded with no crevices to accumulate contamination. Optional end caps are available to provide 100% stroke adjustment in one direction.
Actuator Mounting Manufactured in full compliance with the latest requirements of EN ISO 5211, with provisions for mounting solenoid valves and accessories, comply with NAMUR VDI / VDE 3845
Alloy Steel Shaft : High strength alloy steel shaft with electrolysis nickel plating protection for maximum wear and corrosion resistance.
Circular wiper sight glass.
Size from 2" to 6", in SS316L MOC.
Designed as per ANSI, cGMP norms and pharma / food hygenic standard.
Suitable for vaccum and 6 bar (g) pressure.
E/P surface and food grade gasket.
Process vessel, mixer, blender, reactors, condensers suitable for manual cleaning to have clear view of the process when process liquid is opaque, solid content etc.
Designed in MOC SS316L contact parts.
Operating temp. 950C, pressure 7 bar (g)
Size from 25mm to 76mm
Connections SMS IDF, TC and flanged available.
Pneumatically Operated, modulting type.
Dairy, food, beverages, brewery, pharma process plant to regulate back pressure in hygenic condition.
Designed as per cGMP norms, Hygenic.
MOC SS316L, electropolished No main loop required to run up to consumption point.
Various sizes availble as per consumption.
No weded parts venturi.
Low capital cost.
Distribution of DM water, PURified water and WFI water in contiunous flow at comsumption points in pharma, health care industries.
Designed in SS316L construction
Suitable upto 4kg/cm2(g) pressure and 1300c temp.
Fully sterilsable, hygenic in condition.
'O' ring EPDM food grade. Size : 25mm DIN port welded on vessel/tank surface.
Sterilisable sampling from vessels, fermenters in Pharma, food, beverage, Beer industries, sampling for physio-chemical/micro iological analysis.